Fret Saw

Quality fretsaw frame for accurate fret-work, marquetry, or other intricate and detailed work in thin material. Blades are securely held by clamps on each end. One of the easiest ways to hold your work while using a fretsaw is to clamp one of our fretsaw boards on your bench. Place the work on top of the board and use the saw in a vertical motion. Has a wooden handle.

540-1000   Fret Saw   $13.00

Fret Saw Blades
This is a popular and useful style of blade. Perfect for
use in the fret saw frames. The teeth are designed for
cutting wood, and are hardened for long life.  Blade
length is 130 mm.  The smaller reference number (#0)
is the finer blade, while the larger reference number
(#12) is the biggest blade in the selection. These
blades can also be used in a fret saw machine.
Package of 12 blades.

	Teeth per inch	Ref #	$2.60 per dozen
830-1003	27.0	0
830-1013	25.0	1
830-1023	22.5	2
830-1033	20.0	3
830-1043	18.0	4
830-1053	17.0	5
830-1063	16.0	6
830-1083	14.0	8
830-1103	12.0	10
830-1123	9.5	12

Fretsaw Board
Clamp one of these fretsaw boards on your bench then place the work on top of the board and use the saw in vertical motion. This wider fret saw board makes use of two clamps for secure fastening to the bench. Approximately 5/8" thick, 3 1/2" wide, and 8 5/8" long. No Picture Available.

540-4750  Fretsaw Board with two clamps  $16.20
 

About Us   Contact Us   Policies  Shipping   Go to Checkout

Copyright © 2004 di legno woodshop supply, All Rights Reserved.